What are cold-pressed terminal products
In the components, you must have heard of the terminal this product.
Standard procedure for force measurement of electrical connectors
Electronic connector forms and structures are diverse
Correct operation of cord end terminal
Ensure the connection of cold end terminals.
How to do bad terminal pressing (some solutions to bad terminal pressing).
The terminal has three main parts: the matching part, the transition part and the crimping part. The crimp part is the only part whose design is affected by the crimp process. Here are some of the most common problems and corrective actions. The crimping height of conductor is too small or too large. Solution: adjust… Continue reading How to do bad terminal pressing (some solutions to bad terminal pressing).
What is SMD connectors
Speak of the SMD connector, technology achieves pasted on the surface is already in use in the 1950 s
Introduction to the four basic components of automotive connectors
The contact is the core part of the automobile connector to complete the electrical connection function.
What factors will affect wiring harness aging
The aging of wire harness is the most common problem of wire harness.
Do you know that the temperature resistance of the pin holder of the connector is related to these aspects?
The essential components of electronic products are inseparable from welding processing, so welding knowledge and product material temperature resistance are equally important.
The Specification of VH3.96 Terminal
The spacing of the VH3.96 terminal connector is 3.96MM, which is a large wire-to-board connector in common consumer electronics products.
